
Why the paperwork decides when you get paid
The person who approves your invoice at a retail chain or FM company was not on the roof when your technician replaced the condenser fan motor. They rely on what you send them. If the paperwork is missing, unsigned or unreadable, they cannot tell what they are paying for, and the safe choice for them is to send the invoice back.
In the US this document is usually called a service report, service ticket or work ticket. In the UK it is a job sheet or engineer's report. Platforms such as ServiceChannel ask technicians to take before and after photos and attach them to the work order, and some customers list a signed report among the required attachments. Missing paperwork is on our list of reasons commercial invoices get rejected, and it is one you can catch before the invoice goes in.
What to capture on site
A billing-ready service report answers the questions an approver will ask. Use this as the minimum, then add each customer's own requirements:
| Field | Why billing needs it |
|---|---|
| Customer work order number and PO | Links the report to the invoice the approver is looking at |
| Site name, store or building number, address | Confirms the work was at the site being billed |
| Date, arrival and departure times | Supports the labor hours on the invoice |
| Technician names | Supports the number of technicians billed |
| Equipment: type, make, model, serial, location on site | Shows which unit was worked on, and allows repeat visits to be traced |
| Problem reported and problem found | Explains why the work was needed |
| Work done | Describes what the customer is paying for, in plain words |
| Parts and materials used, with quantities | Matches the materials lines on the invoice |
| Refrigerant added or recovered, type and amount | Required by some customers and by record-keeping rules for certain equipment |
| Status at departure: fixed, temporary fix, needs return visit | Tells the approver whether this is the final invoice |
| Recommendations or quote needed | Starts the next approval, kept separate from this invoice |
| Customer signature, printed name and role | Shows someone on site accepted the work |
On refrigerant: in Great Britain, operators of equipment containing fluorinated gases above a set threshold must keep records that include gas added during maintenance and the dates and results of leak checks, according to gov.uk guidance on recording F gas. Your report is often where those figures come from, so get them right.
Photos that answer the question
A good set of photos lets an approver see the job without visiting. Ask technicians for:
- Before: the equipment as found, including the fault where it can be seen: a burnt contactor, an iced coil, a leaking joint.
- The nameplate: a clear, readable shot of the make, model and serial number.
- The failed part: next to the new one where possible.
- After: the same view as the before photo, showing the finished work, panels refitted and the area left clean.
- Context: one wider shot that shows where the unit is, such as the rooftop position or plant room door, if the customer has several units.
Before and after from the same angle matters more than the number of photos. Five clear, labeled photos are more useful than thirty unsorted ones. Photo apps that stamp the date and time on the image help when a customer questions when the work happened.
Signatures, and who should sign
A signature tells the customer that someone at the site accepted the work. It only helps if the approver can tell who that person was. Ask for a printed name and role alongside every signature: store manager, duty manager, building engineer, security officer. A scribble with no name is close to useless if the invoice is queried.
Some customers specify who may sign. ServiceChannel's guidance, for instance, suggests checking in and out with a manager on site as a best practice. If the right person is not available:
- Note on the report who was asked and why they could not sign.
- Take a photo showing the finished work and the site, so the visit is still evidenced.
- Follow the customer's own rule for unsigned reports, if they have one; some accept a confirmation from the helpdesk instead.
Never let a technician sign on the customer's behalf. It is a quick way to lose a customer's trust.
Timestamps and check-in and check-out
Labor is usually the biggest line on a service invoice, and customers check it. Some chains and FM providers ask technicians to check in and out through an app or a phone line so they have their own record of time on site. ServiceChannel's provider app, for example, records check-in and check-out and only allows them within a short distance of the site.
If your invoice says three hours and their records say two, expect a query. Make sure the arrival and departure times on the report match the check-in and check-out records, and that travel time is billed only where the customer allows it.
Readability: write for a stranger
The approver may be in a shared service center or a different country, working through a queue. They do not know your technician, the site or the history of the unit. A few rules help:
- Use full sentences for the problem found and the work done. "Replaced failed condenser fan motor on RTU-3; unit cooling and cycling normally at departure" beats "FM changed, OK".
- Avoid private shorthand. If an abbreviation is not on the customer's own documents, spell it out.
- Typed beats handwritten. If paper is still used, scan it flat and in color, not photographed at an angle.
- One report per work order. Do not combine two jobs on one sheet.
How to make technicians' paperwork billing-ready
Paperwork problems are often less about careless technicians and more about technicians not knowing what each customer needs, and nobody checking until the invoice is due. A few changes close that gap:
- Put the customer's requirements on the job. If a customer needs a signed report, before-and-after photos and a parts receipt, show that list on the job card or in the app for that customer's jobs. Our guide to turning billing instructions into a checklist explains how to write those lists.
- Check the paperwork the day the job closes. A coordinator who reviews reports daily can call the technician the same afternoon. Three weeks later, at invoice time, that call is much harder.
- Give feedback with examples. Show technicians a report that was accepted and one that came back, and why.
- Track it. Count jobs held for paperwork by technician and by customer. The trend tells you whether the changes are working.
Service report checklist before invoicing
- Report is linked to the right work order and PO.
- Site, date and arrival and departure times are filled in and match check-in records.
- Equipment is identified by model and serial number.
- Problem found and work done are written in plain, full sentences.
- Parts listed match the parts on the invoice.
- Before-and-after photos and a nameplate photo are attached.
- Signature has a printed name and role, or the reason it is missing is noted.
- All other attachments this customer requires are present.
Closebill checks each completed job for the attachments its customer requires, such as a signed service report or before-and-after photos, and flags missing ones before the invoice goes in. See the product page for the full list of checks.
See where your paperwork falls short
If you suspect paperwork is slowing your billing but are not sure where, review a batch of real jobs. Book a job review and we will check 30 completed jobs against your customers' requirements and show which reports and photos would have held the invoice back.